- Fences
- Planning
How to Measure Your Fence Line Before You Get an Estimate
By The Square and Level team
Fence and deck builders
October 5, 2026

The first question in any fence estimate is simple: how many feet of fence do you need? Get that number roughly right and everything after it gets easier. Your ballpark is closer, the conversation is shorter, and there are fewer surprises when someone walks your yard.
You don't need to be exact. You need to be close, and you need to know what to measure.
Option one: measure on a satellite map
The fastest way is from your couch. Our estimate calculator has a Measure on a map instead option. Search your address, then tap along the line where you want the fence. The map adds up the feet as you go.
- Zoom in until you can see your yard's edges clearly.
- Tap at each corner or change in direction. Straight runs only need a point at each end.
- If the fence stops at the house or a driveway and picks up again, use Start a new line so the gap isn't counted.
- Going all the way around? Tap your first point again to close the loop.
Satellite images are a great starting point, but trees, shadows and photo angles can hide the real line. Treat the number as approximate. We confirm every measurement on site.
Option two: walk it with a tape measure
If you'd rather measure in person, grab a long tape measure and a helper, or a measuring wheel if you have one.
- Mark each corner with a stake, flag or rock.
- Measure each side separately and write it down.
- Add the sides together for your total.
- Sketch the shape on paper, with the house, driveway and any trees or slopes along the line.
That sketch is worth as much as the number. It tells an estimator where the gates go, where the ground changes and what's in the way.
Don't forget the gates
Note where you want each gate and how wide it should be. Think about what needs to fit through: a mower, a wheelbarrow, a trailer. Gates are built and priced differently from the fence around them, so it helps to list them separately.
Check these before anyone digs
- Your property line. The edge of your lawn isn't always the edge of your lot. Your county's property records or a survey from your closing papers can show where the line actually is.
- HOA rules. Many neighborhoods set limits on fence height, material or color. Get approval in writing before you commit.
- Buried utilities. Fence posts mean digging. In Colorado, contact Colorado 811 before any digging so buried lines can be marked. The service is free.
- Permits. Some cities and counties require a permit for certain fences. Rules vary, so check with your local building department.
Ready for a number?
Once you have your footage, our calculator turns it into a ballpark range in a minute. It's not a quote. A real price needs a site visit. But it'll tell you whether you're in the right neighborhood before anyone comes out. When you're ready, request an on-site estimate and we'll take it from there.