LVP, laminate, hardwood or tongue and groove: how to choose your floor
By The Square and Level team
Fence and deck builders
November 4, 2026

When people ask us about new floors, the first question is almost always the same: which kind should I get? There's no single right answer — it depends on the room, how hard your household is on floors, and the look you want. Here's the short version.
Luxury vinyl plank (LVP): the tough, waterproof pick
LVP is waterproof, which makes it the go-to for kitchens, bathrooms, laundry rooms and basements. It stands up to kids, pets and muddy boots, and today's planks have a realistic wood look. The trade-off: it isn't real wood, so it can't be sanded and refinished. If a plank gets badly damaged, that plank gets replaced.
Laminate: the budget-friendly wood look
Laminate is a printed wood-look surface over a dense core. Its hard top layer resists scratches well, so it holds up in busy living rooms, bedrooms and hallways, and it's one of the most affordable ways to get a wood look. It handles everyday spills fine, but it doesn't like standing water, so we usually steer it away from bathrooms and basements that can get wet.
Hardwood: the floor that lasts for generations
Real hardwood costs more up front, but it's the one floor here that can be sanded and refinished again and again over the years. Scratches and worn spots get fixed instead of torn out, and a well-kept hardwood floor adds real value to a home. Keep it out of wet areas, and expect it to need a little more care than vinyl or laminate.
Tongue and groove: warm, traditional solid wood
Tongue and groove boards are solid wood that lock together edge to edge for a tight, seamless floor. Knotty pine is the classic — warm, a little rustic, and right at home in cabins and mountain houses. Because it's real wood, it can be refinished down the road too. Softer woods like pine dent more easily than oak, which a lot of people come to love as character.
A Colorado note: dry air moves wood
Our air is dry, especially in winter, and real wood shrinks and swells with the humidity. That's why wood floors can show thin gaps between boards in January that close up again by summer. It's normal, and letting the wood settle into your home before it goes down helps a lot. Vinyl and laminate barely notice the seasons.
Refinish or replace?
If you already have hardwood or tongue and groove and it looks tired — scratched, dull, or worn through where everyone walks — refinishing is often the better move. Sanding down to fresh wood and putting on a new finish can make an old floor look close to new without tearing anything out, and a few damaged boards can usually be repaired on their own. Replacing makes more sense when boards are water-damaged, loose all over, or worn too thin to sand again — or when you simply want a different floor.
Still not sure? Start an estimate and we'll quote your project in more than one material — or price refinishing next to new floors — so you can compare side by side. We work across the Front Range and the Western Slope.